电流监测探头

The F-180907-1005-3 is for laboratory and field testing. This probe has a large
inner diameter of 127mm to accommodate large cable bundles. Primary power
currents of 1000 amperes DC – 400 Hz will not alter its transfer impedance......

The F-180907-1005-2 is for laboratory and fi eld testing. This probe has a large
inner diameter of 127mm to accommodate large cable bundles. Primary power
currents of 500 amperes DC – 400 Hz will not alter its transfer impedance......

The F-180907-1005-1 is for laboratory and fi eld testing. This probe has a large
inner diameter of 127mm to accommodate large cable bundles. Primary power
currents of 500 amperes DC – 400 Hz will not alter its transfer impedance.......

The F-170804-1005-1 is for laboratory and field testing. The useable frequency
range of this probe is 10 kHz – 400 MHz. A typical calibration curve is shown
below. This probe has a large inner diameter making it ideal to clamp around
large cable bundle......

The F-170710-1005-1 is for laboratory and field testing. A typical calibration curve is shown below. This Clamp-On Current Probe can be used for the following specifications: Mil-Std 461F CS114, Mil-Std. 461F CS115, Mil-Std.461F CS116, DO-160 Section 20,......

The F-170705-1005-1 has a usable frequency range of 100 kHz – 30 MHz.
Primary power currents of 750 amperes DC – 400 Hz and 100 amperes pulse
will not alter the transfer impedance.......

The F-170329-1005-1 has a usable frequency range of 10 kHz – 30 MHz.
Primary power currents of 1000 amperes DC – 400 Hz will not alter its transfer
impedance......

The F-170317-1005-1 is for laboratory and field testing. This probe has a
large inner diameter of 305 mm to accommodate large cable bundles. It
can measure up to 1000 amperes DC – 400 Hz without altering its transfer
impedance.......

The F-170308-1005-1 is used to measure conducted emissions from 10 Hz
– 50 MHz. It can handle 50 amperes of primary power line currents from DC
– 400 Hz without saturating or impacting the transfer impedance.......

The F-170302-1005-1 is used to measure pulse currents.......

The F-2000-40mm-1 is for laboratory and fi eld testing. This probe has a small
outer diameter, approximately 80 mm, with an internal diameter of 40 mm. It
can operate up to 350 amperes of DC – 400 Hz, 3 amperes of CW and 100
amperes of peak pulse curre......

The F-2000-32mm-1 is for laboratory and field testing. This probe has a small
outer diameter, approximately 71 mm, with an internal diameter of 32 mm. It
can operate up to 350 amperes of DC – 400 Hz, 3 amperes of CW and 100
amperes of peak pulse curren......

The F-2000-12mm is ideal for laboratory and fi eld testing from 10 MHz to 3
GHz.......

The F-75B has the advantage of being equipped with a large aperture of 70
mm, making it ideal for large cable bundles. The F-75B can be used to measure
pulse currents up to 100 amperes in magnitude with 800 picosecond risetime
and pulse widths of 40 na......

The F-65A is for laboratory and fi eld testing. It is capable of measuring
pulse transients with risetimes of 200 picoseconds and a pulse width of 3
microseconds. This probe has a small outer diameter, approximately 71 mm
with an internal diameter of 3......

The F-65 is for laboratory and fi eld testing. It is capable of measuring
pulse transients with risetimes of 200 picoseconds and a pulse width of 35
nanoseconds. This probe has a small outer diameter, approximately 71 mm
with an internal diameter of 32......

The F-57 is for laboratory and fi eld testing. A typical calibration curve is
shown below. This Clamp-On Current Probe can be used for the following
specifi cations
● Mil-Std 461F CS114
● Mil-Std. 461F CS115
● Mil-Std. 461F CS116
● DO-160 Section 20......

The F-55A is for laboratory and fi eld testing. It is capable of measuring
pulse transients with risetimes of 800 picoseconds and a pulse width of 3
microseconds. This probe has a small outer diameter, approximately 71 mm,
with an internal diameter of......

The F-52B is a clamp on probe designed for use in measuring RF current
on conductors during EMI test. It is for laboratory use by properly trained RF
technical personnel using best engineering practices......

The F-40-5 has a usable frequency range of 10 Hz – 50 MHz. Primary power
currents of 1000 amperes DC – 400 Hz and 5000 amperes pulse will not alter
the transfer impedance.......

The F-39-4 Current Probe has a split core mechanical design permitting it to
easily clip on and off a conductor. It has an extremely small form factor for
clipping on conductors in small spaces. The F-39-4 off ers a wide bandwidth
measurement capabilit......

The F-39-2 Current Probe has a split core mechanical design permitting it to
easily clip on and off a conductor. It has an extremely small form factor for
clipping on conductors in small spaces. The F-39-2 offers a wide bandwidth
measurement capability......

The F-39-1 Current Probe has a split core mechanical design permitting it to
easily clip on and off a conductor. It has an extremely small form factor for
clipping on conductors in small spaces. The F-39-1 offers a wide bandwidth
measurement capability......

The F-38-4 Current Probe has a split core mechanical design permitting it to
easily clip on and off a conductor. It has an extremely small form factor for
clipping on conductors in small spaces. The F-38-4 offers a wide bandwidth
measurement capability......

The F-38-2 Current Probe has a split core mechanical design permitting it to
easily clip on and off a conductor. It has an extremely small form factor for
clipping on conductors in small spaces. The F-38-2 offers a wide bandwidth
measurement capability......

The F-38-1 Current Probe has a split core mechanical design permitting it to
easily clip on and off a conductor. It has an extremely small form factor for
clipping on conductors in small spaces. The F-38-1 offers a wide bandwidth
measurement capability......

The F-37-2 is for laboratory and fi eld testing. The useable frequency range of
this probe is 10 kHz – 1 GHz. The F-37-2 has a typical transfer impedance of
1(+ 2 dB) over the frequency range of 500 kHz – 1 GHz. The RF current
range is 10 amperes CW......

The F-35A-L is for laboratory and field testing. It is used to measure emissions
from 10 Hz – 108 MHz. The F-35A-L can operate up to 200 amperes
of DC – 400 Hz, and 100 amperes of peak pulse.......